OEM Service

Wire Loop Box With Black Plastic provides a protected wire-loop connection point for precast concrete joints. It is cast into the element, stored under the housing cover, and opened on site for reinforcement and in-situ concrete connections.

A magnetic locator is a reusable setting tool for steel formwork. It holds a UNC threaded ferrule insert flat against the form face at the correct setback, and it is released with a 1/2" drive ratchet once the concrete has hardened.

The Wing Wall Anchor is a cast-in threaded insert for precast concrete culvert wing walls. Embedded in the wall panel, it creates a clean, factory-positioned connection for the concrete footing that projects laterally into the backfill behind the wall.

A UNC-threaded ferrule with flared wings welded to the embedded end, cast into precast concrete to create a clean, load-rated bolt attachment. Suited to culvert wing walls and retaining structures; available in 1/2", 3/4" and 1" sizes with a galvanized finish.

HULK Metal expanded coil ferrule inserts are cast-in precast concrete anchors for heavy lifting, bracing and structural connections. A threaded ferrule, shaped struts and an expanded wire coil lock deeply into the concrete to deliver reliable tension and shear performance.

A thin slab ferrule insert is a compact concrete embedment used where standard inserts are too long for shallow elements. Its welded strut base transfers tension and shear into the slab, delivering dependable anchorage for precast panels, tilt-up walls and thin structural sections.

CN1 Standard and CN2 Heavy Duty Coil Nuts are designed for use with Coil Bolts and Coil Rods in concrete formwork, precast anchoring and bridge formwork applications. Their self-cleaning coarse threads enable fast installation, easy removal and repeated reuse.

HULK Metal CB1, CB2 and CB3 coil bolts thread into embedded coil inserts to create secure lifting, bracing, tie-down and fixing points in precast concrete. Self-cleaning coil threads, forged hex heads and high-quality steel deliver dependable performance in 3/4", 1" and 1-1/4" sizes.

Magnetic coil thread protectors lock instantly onto exposed threadbar and coupler threads before casting, keeping concrete slurry and debris out of the thread profile. Magnetic self-retention speeds installation and removal, and full reusability cuts daily consumable cost in precast production.

A threaded socket cast into precast concrete, with a flared wire loop anchor at the embedded end. It provides a connection point for bolts, brackets, pipe hangers and support systems. NC sizes run from 1/2"-13 to 1"-8 UNC; metric versions available.

Forged steel swivel lift plates connect embedded lifting inserts to crane hooks for precast concrete face and edge lifting. Single plates suit 3/4" and 1" bolts. Double plates rotate 360° horizontally and 180° vertically for 1" to 1-1/2" bolts. All rated at 5:1 SWL.

The HULK Coil Disk Anchor is a low-profile, coil-threaded anchorage insert embedded in precast concrete. Its disk base spreads load over a wide area, providing reliable pull-out resistance for lifting, bracing, and tie-down applications in slabs, panels, and thin elements.